R6 Message Net banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
the bike in question is an 05 R6

i am going to flush my coolant out tomorrow and go with distilled water + water wetter and i wanted to make sure i had this correct. below is a picture of the water pump. does anyone know which one #1 or #2 is IN and which one is OUT? my plan is to draw in from a bucket of fresh water and pour out into an empty bucket flushing the system. after the water runs clear i am going drain the water and fill up with distilled water + water wetter, maybe 10-20% antifreeze.

and #3 is a drain right? it looks a bit tiny to drain.

 
1 - 1 of 1 Posts
Top