R6 Message Net banner

1 - 3 of 3 Posts

·
Registered
Joined
·
124 Posts
Discussion Starter #1
HISTORY
Not going to lie to you I rode the bike to enjoy it.
It's been to the drag strip (11.0 @ 135 mph - I weight 190 lb)
It's been to Mosport, Shannonville, Cayuga, Deals Gap and Jennings.
The bike had a low side, in the hairpin on the back straight at Shannonville.
Unfortunately, at the time I didn’t think I would EVER need frame sliders.
Only cosmetic scratches on the right side.

I truly love this bike, and it's hard to let it go, but I need to get my financials in check.

That being said I’m not going to give it away. I will be researching prices of the items on EBAY, Cherrypicker, and R6Messagenet, to get a fair market value. I will obviously cut deals if you are, wanting to buy several items at once.

Pictures available.

BIKE
2005 Yamaha Raven Black R6
20,000 km
Needs the next service
Needs air filter
Needs rubber
Has 2 years (March of 2010) remaining on the Extended warranty which is transferable, bought through Inglis Cycle
Only used Yamaha filters and Motul oil and changed every 3000 km or after every second track day, which every came first.
Changed the spark plugs this summer

Full race Hindle exhaust with Red Pascal Picotte 16" can - hi-exit
Power Commander III with Custom map from Jeff at Cycle Max - dyno'd 110 RWHP on 91 octance
Bike was broke in at Cycle Max on the dyno, before the custom map
Scorpio ir500 alarm with fm pager, perimeter sensor, tilt, shock and battery backup
Scott's Damper
NRC Race engine covers - both sides
Delrin frame sliders
Zero Gravity light smoke windshield - corner broken
Intergrated brake and rear turn signals
Aftermarket red steelbraided with kevlar front brake lines
Timing advance
Graves slide stops

NEW PRICE - $10,500 OBO.

I will throw in ALL the following, unless the following get sold before the bike goes:

2003-2005 R6 Upper race fairing

2003-2005 stock rear brake light
Battery Tender Plus - battery charger
Bike cover

2005 R6 Raven front and rear rims, with full rotors, bearing, dust covers, sprocket, cush drive with Pirelli race slicks still mounted and have some life left in them

2005 R6 stock front brake lines and fittings

2 x 2003-2004 R6 front rotors

2003-2005 air pump and 2 velocity stacks

Several R6 stock reflectors
Bag of Hindle exhaust springs
2003-2004 stock front brake pads
2003-2005 Front and rear axles and bolts
2003-2005 clutch levers
2003-2005 stock rear sprockets, hub and rubbers
2003-2005 Rear fender and plate holder, signals and reflectors

2005 R6 stock engine covers - both sides - very mint condition - removed from bike before broke in on dyno

2005 R6 stock complete exhaust - very mint condition - removed from bike before broke in on dyno

2005 R6 kickstand

2005 R6 radiator - hit something on the back straight at Mosport and JB welded it back to together to finish the weekend – didn’t leak - bought a brand new one the following week - great for a track spare

2003-2005 - R6/R1 - Fuel pump

Canyon Dancer
Loading ramp
Wheel chalk

Bottle of Water Wetter

2 sets of Delrin frame sliders

Joe Rocket GPX 2 piece blue and black size 46 - I'm 5'11" - 190 lb
Had this suit on when I low-sided at Shannonville - forearm is a little scuffed but the suit has lots left in her

Alpinestar S-MX race boots - black EURO 44 (US 10 - 10.5)
used for 2 seasons

BRAND NEW - Joe Rocket Blaster 2.0 boots, EURO 44 (US 10) RED.
Bought new 2 years ago, and forgot them at home, on the way to Jennings.
Hence why I bought the Alpinestars in Chattanooga on the way down

Firstgear - very warm and comfortable riding jacket. Blue and Black, with removal inner lining. I have rode with this jacket with only a t-shirt on underneath in 0C or less and was comfortable

Joe Rocket Blaster Jacket - blue football mesh-style with foam padding in the forearms, elbows and shoulders

Joe Rocket - magnetic tank bag - holds 18 cans of beers (3 x 6 packs, spread open)

Joe Rocket - passenger seat pack - holds a 12 pack of cans or a helmet

Motul - 4 liters 5100 10w40 semi-syn

4L preminum bike washing liquid

Oil filter removing wrench

I will even deliver the bike and stuff anywhere in SW Ontario.

Pictures available

Live in Cambridge, Work in Mississauga

PM or email [email protected]

Thanks R6 Messagenet!
 

·
Registered
Joined
·
124 Posts
Discussion Starter #2
FS - 2005 R6 Raven - Updated 04/17/2008

Asking $10,000 OBO for everything.
 

·
Registered
Joined
·
124 Posts
Discussion Starter #3
FS - 2005 R6 Raven - Updated 04/23/2008

Asking $9,500 or OBO.

Thanks.
 
1 - 3 of 3 Posts
Top