R6 Message Net banner

Easy "newbie" question for fender eliminator on 2005 R6

278 Views 3 Replies 3 Participants Last post by  scfastr6
Apologies since I'm new to all this and somewhat mechanically UNinclined. Got a fender elim kit for my 2005 R6. I know the mounting will be easy but what can I expect with the re-wiring of the signals to the new signals coming with the kit. It's a Competition Werkes kit that I bought. Any tips, pics, or other suggestions are appreciated. Thanks.
1 - 4 of 4 Posts
should be able to just cut the power and ground wire and splice them back without much trouble, it is an easy task.
fender eliminator

scfastr6 said:
Apologies since I'm new to all this and somewhat mechanically UNinclined. Got a fender elim kit for my 2005 R6. I know the mounting will be easy but what can I expect with the re-wiring of the signals to the new signals coming with the kit. It's a Competition Werkes kit that I bought. Any tips, pics, or other suggestions are appreciated. Thanks.
hey there dude.
to bad you've already purchased one. i recently bought one myself from www.vfxkits.com and was really easy to install. bolts into the existing holes, so there is no drilling needed. as for the wiring, all i had to do was splice into three wires. check out the site maybe they have similar wiring diagrams that will help you out. good luck. chad
Much appreciated guys. Thanks a lot. Figured it had to be easy but when I mess with wiring you never know! :)
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top