R6 Message Net banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
This is my first street bike i bought it in boxes and put it all together and its time to try to start it but when I go to start it the relay clicks once every time i hit the start button but I can feel the relay buzzing while holding the button. And whenever I hit the button the check engine light comes on. I just put a new battery in it and I had to put a new main shaft in the tranny before I put it in so I have been through the whole bike other than the top end and have no idea why it won't even try to start. Wiring is my worst enemy hence why I work mostly work on banshees and trx250r's, small 2 strokes with 2 wires on the whole bike
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #2 ·
I found that the starter wire was attached to the wrong terminal of the battery i had it on negative but when I put it on the positive it sparks and "welds" to the terminal but it turns over and won't stop until it i take it off so I still don't know whats going on
 
1 - 2 of 2 Posts
Top