Yoshimura Thread - Q&A, Updates, etc... - Page 5 - R6Messagenet.com
Reply
 
LinkBack Thread Tools Display Modes
post #41 of 435 (permalink) Old 09-07-2005, 12:04 PM Thread Starter
"Project 2K3R6"
 
Join Date: May 2004
Location: SoCal
Posts: 1,401
Feedback Score: 7 reviews
MarvlusR6,
It appears that you are going to need the full system mid-pipe because the slip-on mid-pipe will not work with the headers due to diameter differences. The part# for this is #YZ616RT, and retails for $122.50, and the RS-3 muffler is priced as follows: CF-$375 retail, SS-$250 retail. As for the springs you will need to purchase muffler to midpipe and midpipe to header springs which come to a total of 4 part# RACE-SPS-1

Let me know if you need anything else!!


SILVER 2003 R6 - graves sliders/R1 fork conversion/520 rk chain/galfer front pads
hightech integrator/yoshimura rs-3 carbon slipon/vortex sprokets/libertek flash adjuster
637852852
vahyper6 is offline  
Sponsored Links
Advertisement
 
post #42 of 435 (permalink) Old 09-07-2005, 12:19 PM
Still Ridin!!!
 
MarvlusR6's Avatar
 
Join Date: May 2004
Location: North Alabama
Posts: 466
Feedback Score: 6 reviews
Thanks for the quick response man, I appreciate it.

I think I've got the mid-pipe covered since the headers came with one. Btw, is that mid-pipe price you quoted me for a standard mount or a high exit? Does Yoshi even make a high-exit option for the 00 R6? Also, are those can prices for the race baffle or for the Zyclone baffle?

My main problem looks to be from the mid-pipe back. If I can't get my slip-on to work, then I'll have to pick up another canister. You don't know of anyone who has a used one in good condition they want to get rid of do you? I'd prefer new, but if I could find one in decent shape that was used, I'd probably go that route for now.

I think I've got most of the springs covered as well. It came with springs for the headers and for the header to mid-pipe I believe. I'll have to double check, but I think the only ones I'll need will be the mid-pipe to canister springs.

Thanks again.


Marv
MarvlusR6 is offline  
post #43 of 435 (permalink) Old 09-08-2005, 10:06 PM Thread Starter
"Project 2K3R6"
 
Join Date: May 2004
Location: SoCal
Posts: 1,401
Feedback Score: 7 reviews
^^^^^
the prices i gave you for the mipipe is the same between standard and high exit, the only difference is that you will need to purchase a high exit muffler hanger which is $62.00 to go with the high exit midpipe. As for the mufflers, we do not manufacture Zyclone mufflers for the most part, the only muffler we make zyclone is for a Katana 600/750. So the prices i gave you are for the race mufflers!


SILVER 2003 R6 - graves sliders/R1 fork conversion/520 rk chain/galfer front pads
hightech integrator/yoshimura rs-3 carbon slipon/vortex sprokets/libertek flash adjuster
637852852
vahyper6 is offline  
 
post #44 of 435 (permalink) Old 09-10-2005, 12:21 AM
 
Join Date: Sep 2004
Posts: 29
Feedback Score: 0 reviews
vahyper6,

Did you get my PM?

Thanks,
S.
sharkattack is offline  
post #45 of 435 (permalink) Old 09-10-2005, 02:12 AM
 
Join Date: Jun 2005
Posts: 214
Feedback Score: 1 reviews
vahyper6...cant thank you enough! care package was received today and all is well.


thanks for everything

J
Ta Jay is offline  
post #46 of 435 (permalink) Old 09-10-2005, 07:14 PM
CMD
Senior Member
 
CMD's Avatar
 
Join Date: Dec 2004
Posts: 118
Feedback Score: 1 reviews
Need some info on sliders please.
CMD is offline  
post #47 of 435 (permalink) Old 09-11-2005, 03:36 PM
 
Join Date: Jul 2005
Posts: 2
Feedback Score: 0 reviews
can i get just headers for my rs3 slip on? or do i have to buy a full system
tbipower is offline  
post #48 of 435 (permalink) Old 09-11-2005, 07:43 PM Thread Starter
"Project 2K3R6"
 
Join Date: May 2004
Location: SoCal
Posts: 1,401
Feedback Score: 7 reviews
you can purchase the headers and midpipe which will utilize you current canister!


SILVER 2003 R6 - graves sliders/R1 fork conversion/520 rk chain/galfer front pads
hightech integrator/yoshimura rs-3 carbon slipon/vortex sprokets/libertek flash adjuster
637852852
vahyper6 is offline  
post #49 of 435 (permalink) Old 09-11-2005, 07:51 PM Thread Starter
"Project 2K3R6"
 
Join Date: May 2004
Location: SoCal
Posts: 1,401
Feedback Score: 7 reviews
shark,
I thought i had responded but i guess not, my apologies, Can you supply me with the part# that is stamped on your midpipe near the coneection to the stock header? This will inform me of correct system components or not! Usually our fitment is known to be very close to oem so i would suspect there is some issue preventing the exhast from fitting that way. When mounted the exhuats should be pretty solid as you stated.


SILVER 2003 R6 - graves sliders/R1 fork conversion/520 rk chain/galfer front pads
hightech integrator/yoshimura rs-3 carbon slipon/vortex sprokets/libertek flash adjuster
637852852
vahyper6 is offline  
post #50 of 435 (permalink) Old 09-11-2005, 07:53 PM Thread Starter
"Project 2K3R6"
 
Join Date: May 2004
Location: SoCal
Posts: 1,401
Feedback Score: 7 reviews
i will try to post some pics of the sliders tomorrow.

sliders will fit 03-05 model years and we will supply a cutting template from which you can use to ease installation. All sliders are made of real delrin material and have been tested. Billet spacers are also anodized black in color!


SILVER 2003 R6 - graves sliders/R1 fork conversion/520 rk chain/galfer front pads
hightech integrator/yoshimura rs-3 carbon slipon/vortex sprokets/libertek flash adjuster
637852852
vahyper6 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the R6Messagenet.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 3 (0 members and 3 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome