08 R6 Race goodies

[JarheadR6]

Anyone prepped an 08? Where are you getting parts? A lot of stuff is out, but since my last R6 was an 03, I'm having some trouble, specifically on what is 08 specific and was carries over from the 06/7. Apparently exhausts do. Some list them as diff, some as same...weird.
Can't find a damper at all....
And though Dennie has told me a little, can someone school me up on the whole PCIII vs Ignition Module deal? Do you run either? Both? I'm still up in the air on the D/J quickshifter, as I've done nothing but break them (4 total, one of them Deezul's).
Lastly...bodywork. I don't think I'm going back to skinz...so what is out now that is decent quality.
Thanks for any input.

[halcyon026]

Body work, Tromex.
1/4 turn throttle
I don't do engine/HP mods. I'm not fast enough to need them. I do suspension first.
Exhaust does match up from 06-07
If you don't want D/J I'd get Bazzaz.
Rearsets are same as 06-07 I believe.
Remove 1 or 2 springs from the slipper clutch.

[halcyon026]

Oh and depending on the track -1/+2 gearing feels great on the 08 R6.

[JarheadR6]

Thanks. I've done the 520, but stuck with stock for now till I know where to go with Willow... Usually I start at -1F and go from there...
Yes the rearsets are the same...
Anyone bought a damper yet? GPR is apparently way-back ordered. Ohlins, etc...??

And Halcyon, did you ever run the stock suspension on the track? I'm not too slow, and neither is Willow Springs... and I have NO idea what the track surface is like. but I can't see dropping 2k on suspension right now with moving my fam to CA... Just trying to squeeze in a quick track day or perhaps a sprint mid-May. My luck stock suspension leads to crash...leads to no more 'street' bike...leads to divorce...cause I wasn't supposed to being racing this weekend anyway.
shhhh......

[Big Deezul]

check pitbull for the damper...I liked mine much better then the gpr.
did you check out the bazazz set up instead of dynojet? Also their are qs that work with out a pc like cordona and translogic

[Randal03r1]

I have Catalyst Composites. They fit perfect and have been very happy with the way they crash. Not cheap though...

[halcyon026]

I had my 06 R6 on the track for 2 seasons with stock suspension. Works fine for me but I'm not fast and MMP has a good surface.

[fractureman]

Suspension first, ohlins front and WP rear read my race report for a 2006 R6 http://www.r6messagenet.com/forums/s...d.php?t=149515

Bike can be stock engine road ECU and a track full system and will be fine without kit ECU & Wiring

Just change the gearing so you are bouncing off the limiter doen the straights