my bike 04 R6 was dropped the stator cover broke and the stator wire tore off, motor oil leak off from the broken stator cover, I turn the key to on It shows a err_1 since then.
I have to replace the stator rotor, stator assy and the cover, after I replace them I notice I have error 12, by moving the stator rotor i guess, I open up the other side to check the mark and adjust it to where they mark it still has the error 12 code.
do I have to fix the err_1 first and start the bike to reset the error 12 or are they more things to adjust? how do I fix the err_1 the service manual is not detailed I am stucked please help I miss riding my bike evryday........
error 1 is on service manual it says no signal from ecu, some ppl here say fix there error 1 due to loose or ripped wires, my wiring harness is fine, will check ecu next week, does teh 03 and 04 ecu interchangable?