He's working on the pictures the links went down on him but they'll be back up soon

 

yea i just PMed him to tell him

 

Sorry I was fixing some things that weren't right. It should be up now.

 

holy crapzor. nice :thumbup

 

This is the new and updated version. I sent copies to some people. So this will pertain to them. I changed some things. So the version you have my be a little different than what is up now.

 

Very nice write-up :handclap

 

pretty soon everyone will bo doing this for like $20 i need to come up with some new invention for the 6

 

This is a great write up i can't wait to give it a try myself this week.

 

looks like its time to take a trip to the hardware store :thumbup


congrats on the write up i cant wait to do it myself

 

won't the headlights melt the acrilic rod when everthing is put back together?

 

HighBimmin wont be to happy yo see this post

 

I am working on the How-To. I am up-dated part of the write-up. It will be back up soon.



Edit: Okay the new updated version has been posted.

 

getting the angel eyes isnt the problem, putting them on the headlights are. wish someone can do a write-up on that'll be grrreat.

 

rSix04,

Read all Sections and Parts of the How-To on the Angel Eyes. If you look at Section 3, it tells you how to mount the Angel Eyes to the lights. In Section 2 Part 4, it tells you how to take apart the lighting assembly. And if you look in the How-To section on this board you can find a video on how to take out your head light assembly. A really good video.

So what exactly are you asking for?

 

Wow nice write up.

 

what does the aluminum tap look like?

 

For some reason i can't see any of the instructions.... is link down?

 

Nope...instructions are working fine for me.

 

HighBimmin wont be to happy yo see this post

Why say that? I am very happy to see this how-to posted. Actually I saw it before anyone and gave it a :thumbup . This is DIY, thats not my business.

Oh and once again, very nice write up.

 

Aluminium tape; it looks like duct tape. Its sturdy but flexible enough to manipulate. And it looks like aluminum. If you can't find that type of tape, you can use a real thin piece of sheet metal and zip ties to hold the LED's in place. I will post a pic of the tape either today or tomorrow.

 

Your bike kind of looks like "Johhny-5" when he gets angry........

:lol

 

i think i have everything down except tying the eyes to the metal rings. i am not sure how you hold the angel eyes to the rings...do you just tie it up to the metal rings and then tighten the metal rings or am i getting this wrong? is there any illustration by any chance...? section three is what i am referring to. and yeah...this is an awesome write up.
oh and T-Man_R6...did you do that high beam low beam conversion too?

 

Your bike kind of looks like "Johhny-5" when he gets angry........

:lol

No DISASSEMBLE!!

I want the red eyes and then a loud speaker that comes on when I turn the eyes on and plays the music from the movie when Johnny-5 gets mad and starts blasting things. (or was the when the other robots started blasting things..ah its been too long since I have seen the movie)

 

clique,

Yes. Sorry no pics. I will see if I can get a good pic with the lens cover on. I really don't want to take it all back apart. But if I have too I will.

I will see if I can explain how to do that part a little better.

Loosen the screws on the metal rings; 2.use 3 different pieces of wire for each ring, slide the wire under the ring; 3. make sure the three different pieces of wire (folded in half for better strength) are by the screws (putting the wire by the screws will help conceal the wire) and are even on each end; 4. tighten the screws to the metal rings, not too tight or you will cut the wire; 5. now place the Angel Eyes over the metal rings and tighten (twist) the wire around the Angel Eyes; 6. any extra length of wire, cut (but don't cut too close) and lay/bend the small amount of excess toward the back of the Angel Eyes/metal rings.

that should do it! I will try and get some up-close pics tomorrow. Right now its 10:00 pm here in Germany.

When you complete your Angel Eyes I/We would like to see pics! What color LED's did you use?

Good Luck!!
Thomas

I didn't really think about "Short Circuit" Johnny-5! Your right, thats good! :rollin :wink :thumbup

 

Great writeup.....

I might suggest using high temperature acrylic rods though.