Looking for a How-to? Post your request here!

[njdevil04]

Yea i havent tried to put it on yet but i just got a hid kit and it came with crappy instructions and looks kinda intimidating if you could help me out that would be appreciated thanks

[taffo143]

Originally Posted by ochlocracy

If you want to know how to do any maintenance on you R6, any years, let me know and I will see if I can put one together.

Also if anyone wants to help me out with anything, as far as critiquing, adding some of your own advice, feel free to speak up.

LOOKING HOW TO SETUP 04 SUSPENSION, A GOOD DETAIL HOW 2 PLEASE.

[merlin]

I know quite alot of you have done this, and can probs do it with your eyes shut...

but...

Ive a track day coming up and Im swapping all my bodywork including tank over and havent a clue the best place to start, things to watch out for, best way to remove tank etc etc.

Any help would be great to save me some time and frustration ;)

Thanks guys...

BTW its an '08 R6.

Ta again,

Mart

[gp3021]

I want to change my sprockets on my 08 R6s but i don't know know much about them. I want more acceleration could you tell me what tooth count i should buy and if i need a new chain

[bnimble]

Cannot seem to find a "how to" on replacing the water pump on 99-02 (or any model actually). Disassemble instructions and tips.

thanks

[RusticanR6]

ive searched and cant find a good write up on how to Remove and Clean the Carburetor on my 2000..

help?

[Lowdwn169]

looking for a how to or place to buy a black tach face for my 06 R6S. ugly white just isnt cutting it. email or PM is cool

[R6<2>R1]

Originally Posted by ochlocracy

If you want to know how to do any maintenance on you R6, any years, let me know and I will see if I can put one together.

Also if anyone wants to help me out with anything, as far as critiquing, adding some of your own advice, feel free to speak up.

Hi,
it would be much appreciated if you could help me with remote start alarm installation on 2003 R6.
I have a 2-way remote start that also came with a premiter sensor and i dont know what wire goes to which except for RED & BLACK i tested it and it worked when connecting the black to black and red to red on the STARTER RELAY which leaves me with 6more wires(PINK, BLUE, BROWN, GRAY & 2 YELLOW) to connect but i dont know what wires to tap into since there are a bunch of'em with different colors.
if it's not a bother please email me @ my primary email:
vdub2006@gmail.com

thx in advance.