Quote:
|
The area where you screwed the mount to the tank might start cracking. You will be putting a lot of stress on it with a camera and the bike bouncing around.
|
You think 6 ply will crack? I doubt it but time will tell.
Quote:
|
yea, and the camera will cause an unstable shaky picture. best bet, take the template and have one made form metal.
|
You're rite, it is shakey. The camera's stability software only copes when I'm taking it easy. I'm going to put rubber washers on the mouning bolt and see if it helps. If not I'll get a spring.
Why would metal be better? 2mm mild steel will bounce like a springboard.
I got a cool Idea: I'm going to mount a gyroscope with a ball joint. Drive it with a small electric motor and mount the camera on top. Should put an interesting perspectinve on cornering. The only issue I have is the ball joint has to be high above the tank or the flywheel will foul on the deep corners. Dunno where I'm going to be if I've got a flywheel rotating 20cm above my tank.
